A plastic toothbrush holder is a small SKU with an outsized return rate, and the failures are almost always design decisions rather than material ones: a cup without drainage, a stand that tips when two brushes lean on one side, or a lid that traps humidity against the bristles. Sourcing a plastic toothbrush holder from a Chinese manufacturer means settling those details before the tool is cut, because every one of them lives in the steel. This guide covers the material choices, size families and commercial terms that matter for a bathroom counter programme. The wider houseware range sits in our plastic products category.
Materials Behind a PP Toothbrush Cup
Counter cups and racks are injection moulded from food-grade, BPA-free polypropylene, the same resin family trusted in kitchenware. Virgin PP copolymer keeps impact strength through the drops a bathroom shelf imposes, holds its whiteness under UV-stabilised grades for window-adjacent counters, and tolerates the hot wash-down cycles retail cleaning crews apply. Our industrial polypropylene specifications guide covers grade selection, MFR windows and the test data worth requesting. Premium colour ranges sometimes reach for SAN or ABS to buy gloss and depth, but PP remains the default because it is the cheapest route to a dishwasher-safe part that will not craze after a year of hard water.
Sizes, Drainage and Counter Formats
The category splits into three formats. Travel cases run 19-21 cm with vent slots and a drainage hole at the base. Counter cups are 80-110 mm in diameter, 100-120 mm tall, and weighted at the base so a single brush cannot tip them. A bathroom toothbrush stand with multiple slots reaches 300x100x100 mm and carries two to six brush positions, often with a separate toothpaste ledge. Drainage is the engineering core: a raised floor with 6-10 mm risers channels water to a single outlet, and a pp toothbrush cup that seals water against the handle is the one that grows mould in week three.
- Travel cases: 19-21 cm, snap-fit or screw caps, micro-perforations for airflow
- Counter cups: 80-110 mm diameter, weighted bases, 22-100 g finished weight
- Multi-slot stands: up to 300x100x100 mm, slots spaced for electric toothbrush heads
What a Plastic Toothbrush Holder Manufacturer Should Confirm
Tooling is P20 or 718H steel with four to eight cavities; 20-30 days is the normal window, samples follow in 7-10 days, and mass production runs 25-45 days for a full container. MOQs start near 500 pieces for catalogue models and rise to 3,000-5,000 for custom colours or private-label packing. Tolerances on lid and body interfaces should be quoted at ±0.2 mm or better, since that fit decides whether the unit feels premium on the counter. For programmes heading into the EU, our PFOS free plastic guide explains the fluorine limits buyers now verify in bathroom goods. Retail packing adds blister cards with EAN space and a multilingual material statement, and a 40 HQ absorbs roughly 60,000-90,000 counter cups depending on format. Verified partners can be shortlisted through our company directory.
Related product categories
The materials and part types discussed above are grouped in our sourcing directory:
