A plastic pet bowl manufacturer moulds the feeding products that pet retailers, subscription-box brands and veterinary clinics order by the pallet. The category spans single and double pet bowl models in food-grade PP, slow-feeder designs that pace fast eaters, and custom shapes built on dedicated tooling - from a basic pet food bowl to elevated stand feeders. This guide covers the range, the compliance points and the numbers worth fixing before an RFQ.
What a plastic pet bowl manufacturer supplies
- Single and double pp pet bowl sets from 200 ml to 2 L for cats, dogs and small animals.
- Slow feeder bowl designs with maze or ridge patterns that pace fast eaters.
- Elevated stand feeders holding two or four bowls at raised height.
- Travel and collapsible bowls for outdoor, car and kennel use.
- Custom OEM shapes with Pantone or RAL colour matching and logo decoration.
Materials and food-contact compliance
Food-grade PP is the default resin: BPA-free, phthalate-free, low-odour and rated from about -20 to 120 degrees C, so bowls move from freezer to dishwasher without cracking. EU programmes expect declarations under the framework food-contact regulation, US retail looks for FDA-listed compounds, and LFGB is the German-market reference - background sits in our food-contact kitchenware guide and FDA food contact guide. PP is fully recyclable, and factories commonly run clean regrind up to about 15% without visible property loss.
Specifications to confirm
- Capacity and diameter: 200 ml to 2 L, typically 10-30 cm across the rim.
- Wall thickness: 2.0-4.5 mm depending on size and drop-test duty.
- Base geometry: rubber or silicone feet and a widened anti-tip footprint.
- Tolerances: plus/minus 0.1 mm on seating faces, P20 or 718H tool steel.
- Finish and decoration: smooth, textured or matte; pad print, IML or heat transfer.
Tooling, sampling and MOQ
Stock catalogue shapes start around 500-3,000 pieces per design; new custom tooling runs 20-30 days and samples follow 7-10 days after mould completion, with bulk production at 25-45 days. Confirm whether the quoted MOQ counts per design or per colour, and whether tooling is amortised into the unit price or charged separately. Audited factory profiles sit in the supplier directory, and the wider moulded-product range is listed under plastic products.
Related product categories
The materials and part types discussed above are grouped in our sourcing directory:
