A plastic laundry basket manufacturer moulds the hampers, bins and sorting sets that homeware retailers, laundry-care brands and e-commerce sellers order by the container load. The category covers vented PP baskets for family bathrooms, tall 28-45 L laundry hamper profiles for shared utility rooms and slim sorters for apartments - in stock catalogue shapes or custom OEM designs. This guide covers the range, the material and durability points, and the specifications worth fixing before an RFQ.
What a plastic laundry basket manufacturer supplies
- Vented laundry basket models in food-grade PP from 8 L to 45 L, with slot or lattice panels covering roughly 10-15% of the wall area to keep damp laundry aerated.
- Tall hamper profiles from 50 to 70 cm high for bedroom, dormitory and utility-room programmes.
- Two- and three-basket sorting sets, with or without stands, for multi-stream household laundry.
- Foldable and slim-line designs for small apartments, student housing and travel retail.
- Custom colours to Pantone or RAL with pad print, IML or heat-transfer logos, plus retail-ready EAN packing.
Materials and durability
Food-grade PP is the default pp laundry basket resin: BPA-free, low-odour, easy to wipe clean and stable from freezer rooms to hot utility areas. Value programmes increasingly specify post-consumer recycled content, but claims need documentation - our ISCC PLUS certification guide and recycled plastic market trends article explain how recycled-content claims are verified upstream. Wall thickness runs about 1.2-1.8 mm on small baskets and 1.8-2.5 mm on 40 L-plus models; reinforced rims and thick-section handles carry a 10 kg wet load without creep, and UV-stabilised grades are specified for balcony and semi-outdoor use.
Specifications to confirm
- Capacity and dimensions: 8 L at about 30x30x53 cm, 28 L at 37x37x60 cm, 40-45 L at 40x40x68 cm to 45x37x50 cm.
- Ventilation pattern: slot or lattice geometry, and whether panels trap odour or drain rinse water.
- Base and stacking: non-slip feet, flat-lid stacking height, and nest ratios for empty return freight.
- Packing: 10-20 pcs per carton with individual PE bags; retail box or bulk polybag per channel.
Tooling, MOQ and lead times
Stock shapes start around 1,000-5,000 pieces per design depending on size; new custom tooling runs 25-35 days, samples follow 7-10 days after mould completion and bulk production lands at 30-45 days. Seasonal programmes should be booked two to three months ahead of the selling window, and ocean transit adds 30-40 days. Audited factory profiles sit in the supplier directory, and the wider moulded range is listed under plastic products.
Related product categories
The materials and part types discussed above are grouped in our sourcing directory:
