A plastic soap dish manufacturer moulds the draining trays, holders and compartment dishes that bathroom retailers, hotel amenity programmes and e-commerce sellers order by the carton load. The range covers countertop dishes with sloped bases and drain slots, no-drill adhesive wall holders, suction-cup models for shower niches and two-compartment versions that keep bar soap and sponges apart. This guide covers the product range, the material and hygiene points, and the specifications worth fixing before an RFQ.
What a plastic soap dish manufacturer supplies
- Countertop draining dishes with sloped bases, elevated ribs and drain slots or channels that keep bar soap dry between uses.
- Two-tier and two-compartment models where the top leaf or tray holds the soap and a removable lower tray catches drips.
- Adhesive wall holders with industrial-grade pads for tile, glass and laminate - no drilling, popular in hotels and rentals.
- Suction-cup dishes with four silicone grip pads for shower niches and family bathrooms.
- Decoration in Pantone or RAL colours with pad print, IML or heat-transfer logos, plus EAN retail packing.
Materials and daily use
The standard pp soap dish resin is food-grade PP: BPA-free, low-odour, resistant to bathroom chemicals and stable from freezer shipping to hot utility rooms. Wall thickness runs 1.8-2.5 mm so dishes survive drops onto tile, and the smooth, non-porous surface wipes clean without trapping soap scum. Most programmes are specified as dishwasher safe - useful for hotel amenity buyers - and moulded-in antiskid feet keep a bathroom soap dish stable on wet countertops. Recycled-content grades are available where the programme needs them, and claims should stay documented.
Specifications to confirm
- Dimensions: countertop dishes from about 10x7x3 cm up to 18x13x5 cm; confirm the largest bar the programme sells.
- Drainage geometry: slot width and count, base slope, and whether the lower tray lifts out for cleaning.
- Mounting: adhesive pad area and pull strength, suction cup diameter, or free-standing weighted base.
- Packing: 24-48 pcs per carton in individual OPP bags, or colour box per unit for retail.
MOQ, tooling and lead times
Catalogue colours start around 1,000-3,000 pieces per design; each new soap dish mold runs 20-30 days, samples follow in 7-10 days and bulk production lands at 25-35 days. Certification expectations for bathroom and kitchen plastics are covered in our FDA, LFGB and EN71 guide, and material trade-offs against ceramic and silicone sit in the food grade PP vs platinum silicone article. The wider moulded range is listed under plastic products, and audited factory profiles sit in the supplier directory.
Related product categories
The materials and part types discussed above are grouped in our sourcing directory:
