A plastic broom is one of the highest-volume houseware SKUs a retail buyer can source, and the gap between a broom that sells through and one that comes back shows up in bristle specification rather than in the quotation. This guide walks through what a serious plastic broom programme looks like: how PP and PET bristles are specified, how heads and handles are dimensioned for carton economics, and what tooling and MOQ terms a broom manufacturer should be quoting against. The full houseware range sits in our plastic products category.
Materials Behind Every PP Bristle Broom
Export-grade sweeping brooms pair a moulded PP head with either PP or PET bristle flags. Virgin PP copolymer keeps the flags flexible after repeated floor contact and tolerates the UV exposure of balcony and garage use; PET flags add stiffness for coarse outdoor debris. Both materials rinse clean, resist detergent and dry fast, which matters for products that sit in a pail of water between uses. Handles run to three families: varnished eucalyptus at roughly 120 cm and 22-28 mm diameter, powder-coated steel, and all-PP moulded handles for fully recyclable programmes.
- Bristle flags: virgin PP or PET, 8.5-14 cm long depending on indoor or outdoor duty
- Head widths: 23-30 cm across household and angle-broom formats, moulded in 4-8 cavity tools
- Planting: flags are anchored in the moulded head, so pull-out strength is a tooling question, not a glue question
Head Sizes, Handles and Packing Economics
Household brooms typically run a 26-30 cm head with 8.5-9 cm flags at 155-230 g finished weight, while large angle brooms reach 23 x 16 cm head covers with 12-14 cm flags at up to 265 g. Handle length scales from 120 cm for home use to 150 cm for industrial sweeping. Carton packing runs 24-48 pieces depending on head size, and a 40 HQ absorbs roughly 30,000-46,000 pieces across models. Retail programmes add a hang tag with EAN space and a multilingual fibre-content statement; the tag is often the only artwork on the product, so substrate and print method should be agreed at quotation stage.
What a Plastic Broom Manufacturer Should Confirm
Tooling for a broom head is P20 or 718H steel with planting inserts; four to eight cavities is the norm and 20-30 days is the common tooling window, with samples following in 7-10 days. Mass production runs 25-45 days for a full container. MOQs start near 500-1,000 pieces for a catalogue model and rise to 3,000-5,000 for custom colours or private-label packing. Two commercial details separate professional suppliers: they run bristle-planting machines in-house rather than outsourcing the head, and they quote HS 9603.90 honestly so the duty line is clear before the first order. Buyers pursuing a recycled-content claim should read our rPET vs virgin PET quality comparison before specifying recycled flags, and our bioplastic vs conventional plastic cost analysis explains why the premium sits where it does. Supplier vetting starts with our company directory.
Related product categories
The materials and part types discussed above are grouped in our sourcing directory:
