Product Description
| Features: |
| Low profile with capacity 80 litres (21 gallons) |
| Walls and grates are level, easy to move drums from one deck to another |
| Interchangeable grates for deck/pallets with large openings for easily leak detection and remove spills |
| Dual ends forklift pockets are compatible with most forklift trucks |
| Each deck has build-in clip to easily connect multiple deck to create a drum storage platform. |
| Nestable design to minimal the space for storage and shipment |
| HDPE and Hot Dip Galvanized Steel grates are available for customer choice |
1. 1X20GP can load 234 sets Two-drum spill deck orange,
1X40HQ can load 605 sets Two-drum spill deck orange,
2. It can mix container load with other spill containment products,
3. FOB, C&F, CIF, Door to Door,
4. By Air or Sea, FCL or LCL depends on customer,
5. Customer should provide the freight forwarding agency if the terms in FOB,
6. Leadtime:15 days after T/T.
1. We are 10+ years experience to manufacture various spill containment products,
2. We sell in product over 50 countries around the world,
3. We produce the product resulted in our price is competitive and the QA division take inspection for each lot of production to guarrentee the quality,
4. We maintain the adequate inventory to serve our clients.
Company Information
1. The manufacturer of spill containment products have been engaged in the business 10+ years.
2. All products are developed by us and owned our moulds.
3. We have ability to design and build the new product and plant for production.
4. We exported around 100 containers of spill containment product a year over 50 countries around the world.
Q1 : Can you mix the container load for the 2 drums spill deck, 2 drums spill pallet, 4 drums spill pallet, IBC spill pallet and IBC Low-profile spill pallet?
A1: Sure, we can take to mix load into a container. We will prepare a shipment plan based on the customer order (customer should advise the cut and fill item when order), it shows kind, number and dimensions of products.
Q2: Why use the steel to replace the plastic grate for the spill containment products?
A2: We realized some customers to load the unevenly distributed weight across the plastic grating surface and caused it easy to crack and collapse. We tested and found that steel has better performance than the plastic grate to support the unevenly distributed weight object.
Q3: What are the advantages of the product formed by injection molding?
A3: Injection molding is a far better process than rotational molding, better part formation, even wall thickness, excellent part finish, controlled shrinkage, lighter weight are some of the characterisitcs of injection molding that make our pallets stronger and allows us to use HDPE for our product.
Q4: What about the sump capacity?
A4: They meet the regulation of EPA 40 CFR 264.175, SPCC 40 CFR 112.7.
