Product Description
Product description:
Composition:
Pigment: 25%-50%
Carrier: LDPE, LLDPE,PE
Production Description:
Colour masterbatches with high pigment content offer excellent dispersion, high thermal strength, superior fastness to light and gloss.
Products with varying pigment contents can also be customized, based on customer demands.
Range of application:
Blow molding, injection molding, wiredrawing, extrusion molding
Method of Usage:
l Step 1: Confirm the percentage of appending proportion.
For example: If using for film blowing with PE material, the required percentage is 4%.
*The normal proportion is 2% - 4%. But it is not fixed. It depends on the buyer's requirement.
l Step2: Mix the material and the masterbatch together by the blender mixer according to the appending proportion. If no blender mixer, it can be manual mixed.
For example: Put 100kg PE material and 4kg PE masterbatch into the blender mixer.
*NOTED: The carrier of masterbatch must be the same with the material.
l Step 3: Continue the film blowing process as normal.
Suggested Ratio Dosage:0.2-0.4%
Physical Properties:
Packing:
cylindrical pellets,smooth surface,uniform colour, 25kgs per package
Composition:
Pigment: 25%-50%
Carrier: LDPE, LLDPE,PE
Production Description:
Colour masterbatches with high pigment content offer excellent dispersion, high thermal strength, superior fastness to light and gloss.
Products with varying pigment contents can also be customized, based on customer demands.
Range of application:
Blow molding, injection molding, wiredrawing, extrusion molding
Method of Usage:
l Step 1: Confirm the percentage of appending proportion.
For example: If using for film blowing with PE material, the required percentage is 4%.
*The normal proportion is 2% - 4%. But it is not fixed. It depends on the buyer's requirement.
l Step2: Mix the material and the masterbatch together by the blender mixer according to the appending proportion. If no blender mixer, it can be manual mixed.
For example: Put 100kg PE material and 4kg PE masterbatch into the blender mixer.
*NOTED: The carrier of masterbatch must be the same with the material.
l Step 3: Continue the film blowing process as normal.
Suggested Ratio Dosage:0.2-0.4%
Physical Properties:
| esistance Temperature | 280°C=536 °F |
| Granule Appearance Diameter | 2.5mm-2.8mm |
| Melting Point | 110 °C=230 °F |
| Addition Rate | 2-4% |
| ROHS Index | Environmental |
Packing:
cylindrical pellets,smooth surface,uniform colour, 25kgs per package
