| PA6GF60 |
B110GH |
| Product Description |
Applications |
| 60% glass fiber reinforced PA6 |
Injection molding |
| Good mechanical properties balance |
| Properties |
Test Method |
Test Condition |
Unit |
Typical Values(dry) |
| Physical properties |
| Specific Gravity |
ISO 1183 |
23°C |
g/cm³ |
1.71 |
| Ash |
ISO 3451 |
800°C,30min |
% |
60 |
| Mechanical properties |
|
| Tensile Strength |
ISO 527 |
5mm/min |
MPa |
235 |
| Tensile Modulus |
ISO 527 |
1mm/min |
MPa |
22000 |
| Elongation at Break |
ISO 527 |
5mm/min |
% |
2.2 |
| Flexural Strength |
ISO 178 |
2mm/min |
MPa |
400 |
| Flexural Modulus |
ISO 178 |
2mm/min |
MPa |
20000 |
| Unotched Charpy Impact Strength |
ISO 179-1/1eU |
23°C |
kJ/m2 |
95 |
| Notched Charpy Impact Strength |
ISO 179-1/1eA |
23°C |
kJ/m2 |
18 |
| Thermal properties |
| Heat deflection temperature |
ISO 75 |
1.80MPa |
°C |
212 |
| Melt Temperature |
ISO 11357 |
DSC |
°C |
220 |
| Other properties |
| Mold Shrinkage |
internal test method |
flow direction |
% |
TBD |
| cross flow direction |
% |
TBD |
| Flammability |
ISO 3795 |
- |
mm/min |
30 |
| Note: The data above is typical value for reference, not guarantee value. The data will vary with tool design such as gate type , gate location, gate number, injection molding process and part thickness. The data will vary with different color as well. Prior to use the material, please consult with Suzhou Shituo New Material Co., Ltd. |
| Processing Conditions |
Range |
| Melt Temperature |
240-270°C |
| Barrel Temperature |
Rear |
240--250°C |
| Center |
250--260°C |
| Front |
260--270°C |
| Mold Temperature |
70-100°C |
| Pre-Dry needed |
110-120°C, 4-6h dehumidified dryer |
| Note: The above process condition is only for reference. The actual process should be adjusted according to different type of machine, mold design and product design. |
Suzhou Shituo New Material Co., Ltd.The company was established in 1998; Registered capital of 100 million RMB, 30 minutes from Shanghai high-speed rail; 1 hour from Nanjing,is a High-Tech Enterprise specializing in the production and R&D of technique compounds based on PA6, PA66, PP, PBT, PC, ABS, PC/ABS, HIPS, AES, PVC, TPE, disposable formwork (for lightweight fill applications) and reusable formwork (for modular applications). With two advanced high-speed twin-screw mixing equipment and one professional sample production line, our annual sales reached 10, 000 tons with actual production capacity reaching up to 15, 000 tons. We also have an independent laboratory with a full range of testing machines and a team of professional engineers. Our company owns ISO9001: 2008 and other quality system certifications, we can also supply the material with RoHS, REACH, and SGS certificates. We are confident to provide high-quality materials which can fully meet different clients′ expectations. Our materials are now widely used in automotive, household appliances, electronic appliances, telecommunications, and other industries.
1. Q: Are you a manufacturer or a trading company?
A:We are a company with integration of industry and trade.
2. Q: Can you do OEM?
A:Yes, we can do OEM products. Engraved your logo on the products and printing on the customized packaging
3. Q:And Logo printing?
A:We can print your logo in the products as you required.
4. Q:How can I get some samples?
A:1, We are honored to offer you samples. New clients need pay for the courier cost, the samples are free for you, this charge will be deducted from the payment for large order.
2,Regarding the courier cost: you can arrange a RPI (remote pick-up) service upon FedEx, UPS, DHL, TNT, etc. to have the samples collected; or inform us your DHL collection account. Then you can pay the freight direct to your local carrier company.
5. Q:How does your factory do regarding quality control?
A:1) Skillful workers care every details in handling the producing and packing processes.
2) Quality Control Department is specially responsible for quality checking in each process.
